FSL have been involved in the security industry for over 30 years. As can be seen from the examples, FSL can cater for all types and sizes of security vehicles from a small Mercedes Citan van up to a 44-tractor unit and trailer.
As the level of security is dependant on the clients request and operational requirements no two vehicles tend to be the same. FSL have the in-house ability to supply all ballistic materials that are currently available be that armoured steel, composite armour or Kevlar. All materials used are supplied fully certified. Vehicle glazing can be protected with various options from a simple anti bomb blast film right through to Stanag 2 level ballistic protection.
Vehicles can be converted in either a discreet or overt way dependant on client’s requirements. The operation of the vehicle can be a critical security feature to most clients. At FSL all vehicle operational and control software is written in house together with the electrical design. Undertaking this type of work in-house enables FSL to react fast throughout the vehicle's life, should the client’s operational procedures need to change due to any change in threat.
FSL has experience in shipping and supporting vehicles worldwide. This can all be catered for by our transport and logistics staff. Any PRI will also be arranged subject to the country of arrival's requirements.
Due to the security nature of this type of conversion, should you require any further information please contact the office and an appointment can be made to discuss your requirements in detail.
|Ballistic Standards (VPAM / BS EN 1063 / BS EN 1522/23 )|
|Standard||Weapon||Cartridge||Ammunition and Bullets|
|VPAM1||B1||.22 Ir||L/RN||2.6 ± 0.1|
|VPAM2||-||9mm Luger||FMJ/RN/SC plated||8.0 ± 0.1|
|VPAM3||B2||9mm Luger||FMJ/RN/SC plated||8.0 ± 0.1|
|VPAM4||B3||.357 Mag.||FMJ/CB/SC||10.2 ± 0.1|
|B4||.44 Rem. Mag.||FMJ/FN/SC||15.6 ± 0.1|
|VPAM5||-||.357 Mag.||FMs/CB||7.1 ± 0.1|
|VPAM6||-||7.62 x 39||FMJ/PB/FeC||8.0 ±0.1
|VPAM7||B5||.223 Rem. (5.56 x 45)||FMJ/PB/SCP||4.0 ± 0.1|
|B6||.308 Win. (7.62 x 51)||FMJ/PB/SC||9.55 ± 0.1|
|VPAM8||-||7.62 x 39||FMJ/PB/HCI||7.7 ± 0.1
|VPAM9||B7||.308 Win. (7.62 x 51)||FMJ/PB/HC||9.45 ± 0.1
|VPAM10||-||7.62 x 54 R||FMJ/PB/HCI||10.4 ± 0.1
|VPAM11||-||.308 Win. (7.62 x 51)||FMJ/PB/WC||8.4 ± 0.1
|VPAM12||-||.308 Win. (7.62 x 51)||FMJ/PB/WC||12.7 ± 0.1
core:5.58 (Hardness: 1330 HV 10)
|VPAM13||-||.50 Browning||FMJ/PB/HC||43.0 ± 0.5
|VPAM14||-||14.5 x 114||FMJ/PB/HCI||63.4 ± 0.5|
Select image for details